Description:
English salt-glazed stoneware teacup decorated in red, blue, pink, yellow, and green. There is a thin red line on the inside of the slightly flared rim; the outside has three chinoiserie floral sprays with red, blue, pink, yellow flowers and small green leaves. The bowl has a hemispherical thrown body with an applied flat foot. Although Staffordshire white stoneware had been perfected by about 1720, its possibilities for mass-production were not fully exploited until the 1740s. Then the techniques of press-moulding, slip-casting and enamelling were developed, and the drabness of the greyish stoneware surface was successfully relieved by the addition of all-over decoration. Colorfully painted stoneware using enameled decoration was being produced in Staffordshire by the mid 1750. Since these pieces required a second firing to fuse the enamels onto the glazed surface, these wares were more expensive than white stoneware. The glaze on the stoneware was the result of throwing salt into a high temperature oven (1000-1100 degrees), where the heat caused the salt to volatilise and the soda in the salt to combine with the alumina and silica in the clay to form a thin vitreous glass-coating over the surface. That outer layer has characteristic minute pitting. Since there are no factory markings, it is very difficult to link pot with potter.
Subjects:
Pottery; Copper; Enamel and enameling; glaze (coating by location); Stoneware Link to share this object record:
https://museums.fivecolleges.edu/detail.php?t=objects&type=ext&id_number=HD+1998.856 |
