Description: English creamware pierced brazier used to keep a pot of hot water warm at the tea table; the bowl-shaped stand held a spirit burner in its base (now missing on this example); and the top scrolls extending from the bowl and the interior projections supported a kettle filled with hot water. This brazier has three scrolls and three interior foliate projections attached to the wide lip; two attached coil handles; a band of openwork design around the upper half of the sides; and is supported on three molded paw feet. Enoch Booth (c.1703-1773) of Tunstall, England, developed the fine, light-colored earthenware now known as creamware in the early 1740s using the various improvements in body, glaze, and firing; but it was Josiah Wedgwood (1730-1795) who perfected and successfully marketed the ceramic body. Wedgwood’s version of creamware resulted from many experiments with white clays and improved glazes; by 1762, he had developed a light, sturdy, refined, and yet inexpensive cream-colored earthenware body. Wedgwood described the new product as "a species of earthenware for the table, quite new in appearance, covered with rich and brilliant glaze, bearing sudden alterations of heat and cold, manufactured with ease and expedition, and consequently cheap." Middle-class consumers rushed to purchase creamware, bringing the popularity of alternative ceramics such as tin-glazed earthenware and salt-glazed stoneware to an end. In an effort to capture a segment of the creamware market, many English potteries also began to produce the ceramic; estimates suggest that more than 150 factories in England manufactured the ware. Unfortunately most early wares were not marked, making attribution to a particular factory difficult. Condition: there is a chip off one of the feet.
Link to share this object record: https://museums.fivecolleges.edu/detail.php?t=objects&type=ext&id_number=HD+2006.33.44 |